Emaux
Emaux E2200 commercial sand filter
Emaux E2200 commercial sand filter named model. Source volume 6.49 m³, filter area 3.80 m², flange 200 mm / 8”. Tank size is not plant footprint; configuration rows stay separate; install envelope not inferred.
- Brand / publisher
- Emaux · Emaux Water Technology Co., Ltd. (Emaux / EMAUX)
- Model
- E2200
- Category
- Pool equipment
- Region / configuration
- Region in original source · Source code 9014825; Laterals System, 2.5bar; Source code 9014826; Laterals System, 4bar
Up to 4 records; compare original sources without recommendations or performance ranks.
Models and configurations retain their source scope. Check specifications against the venue and intended use.
Scope
Voltage/frequency/phase variants retain their source codes. Current SKU/supply unverified; tank size is not an assembled footprint. No installation suitability or operating envelope selected.
AO Ranking Review
Emaux E2200 commercial sand filter (Emaux commercial filter brochure): 6.49 m³ volume, 3.80 m² filter area, 200 mm / 8" flanges; the lateral version takes 4568 kg of 0.5-0.8 mm media and 1479 kg of 1-2 mm media, the nozzle version 4234 kg and 841 kg; each internal design comes in 2.5 bar and 4 bar codes.
AO Ranking view: The largest E filter: 3.80 m², 200 mm flanges and 4,568 kg of fine media on the lateral version. Its 6.49 m³ volume is 41% above E2000 while the area is only 21% larger, so a deeper bed is the main difference (AO Ranking view).
Suitable settings
- Sand filtration for public and competition pools
- Large treatment plant rooms with tanks in parallel
Buying checklist
- Choose the 2.5 bar or 4 bar code by system pressure
- Check floor loading against full weight (tank, media and water)
- Lateral and nozzle internals take different media quantities; do not mix the lists
- The source declares no national standard or certification; obtain any required test reports separately
Peer comparison
The library's seven Emaux E filters step through 0.86, 1.13, 1.54, 2.01, 2.54, 3.14 and 3.80 m² of filter area, with flanges rising from 80 to 200 mm.
Source-scoped parameters
Vol.
6.49
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Filter Area
3.80
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Flange Connections GB
200
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Flange Connections ANSI
8”
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Sand Weight 0.5-0.8mm
4568
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Sand Weight 1-2mm
1479
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Vol.
6.49
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Filter Area
3.80
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Flange Connections GB
200
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Flange Connections ANSI
8”
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Sand Weight 0.5-0.8mm
4234
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Sand Weight 1-2mm
841
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Product Dimensions A/B/C/D/E/F/G
230 | 940 | 500 | 1440 | 2376 | 2200 | 1800
Original scope conditions
A/B/C/D/E/F/G reference the exact source drawing; not relabeled as generic length/width/height. Source-specific configuration, not independently measured. Market region and effective date unspecified.
| Parameter | Original value & unit | Conditions, scope & source |
|---|---|---|
| Vol. | 6.49 | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014825; Laterals System, 2.5bar; Source code 9014826; Laterals System, 4bar Open source ↗ |
| Filter Area | 3.80 | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014825; Laterals System, 2.5bar; Source code 9014826; Laterals System, 4bar Open source ↗ |
| Flange Connections GB | 200 | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014825; Laterals System, 2.5bar; Source code 9014826; Laterals System, 4bar Open source ↗ |
| Flange Connections ANSI | 8” | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014825; Laterals System, 2.5bar; Source code 9014826; Laterals System, 4bar Open source ↗ |
| Sand Weight 0.5-0.8mm | 4568 | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014825; Laterals System, 2.5bar; Source code 9014826; Laterals System, 4bar Open source ↗ |
| Sand Weight 1-2mm | 1479 | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014825; Laterals System, 2.5bar; Source code 9014826; Laterals System, 4bar Open source ↗ |
| Vol. | 6.49 | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014827; Nozzle System, 2.5bar; Source code 9014828; Nozzle System, 4bar Open source ↗ |
| Filter Area | 3.80 | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014827; Nozzle System, 2.5bar; Source code 9014828; Nozzle System, 4bar Open source ↗ |
| Flange Connections GB | 200 | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014827; Nozzle System, 2.5bar; Source code 9014828; Nozzle System, 4bar Open source ↗ |
| Flange Connections ANSI | 8” | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014827; Nozzle System, 2.5bar; Source code 9014828; Nozzle System, 4bar Open source ↗ |
| Sand Weight 0.5-0.8mm | 4234 | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014827; Nozzle System, 2.5bar; Source code 9014828; Nozzle System, 4bar Open source ↗ |
| Sand Weight 1-2mm | 841 | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014827; Nozzle System, 2.5bar; Source code 9014828; Nozzle System, 4bar Open source ↗ |
| Product Dimensions A/B/C/D/E/F/G | 230 | 940 | 500 | 1440 | 2376 | 2200 | 1800 | Original scope conditionsA/B/C/D/E/F/G reference the exact source drawing; not relabeled as generic length/width/height. Source-specific configuration, not independently measured. Market region and effective date unspecified. |
Sources & retrieval dates
Documented source dates
- Source acquisition record

