Emaux
Emaux E1400 commercial sand filter
Emaux E1400 commercial sand filter named model. Source volume 2.10 m³, filter area 1.54 m², flange 100 mm / 4”. Tank size is not plant footprint; configuration rows stay separate; install envelope not inferred.
- Brand / publisher
- Emaux · Emaux Water Technology Co., Ltd. (Emaux / EMAUX)
- Model
- E1400
- Category
- Pool equipment
- Region / configuration
- Region in original source · Source code 9014809; Laterals System, 2.5bar; Source code 9014810; Laterals System, 4bar
Up to 4 records; compare original sources without recommendations or performance ranks.
Models and configurations retain their source scope. Check specifications against the venue and intended use.
Scope
Voltage/frequency/phase variants retain their source codes. Current SKU/supply unverified; tank size is not an assembled footprint. No installation suitability or operating envelope selected.
AO Ranking Review
Emaux E1400 commercial sand filter (Emaux commercial filter brochure): 2.10 m³ volume, 1.54 m² filter area, 100 mm / 4" flanges; the lateral version takes 1495 kg of 0.5-0.8 mm media and 498 kg of 1-2 mm media, the nozzle version 1337 kg and 383 kg; each internal design comes in 2.5 bar and 4 bar codes.
AO Ranking view: Flanges rise from 80 to 100 mm and the 1.54 m² area is 36% larger than E1200. Mid-size public pools often land here with one or two tanks (AO Ranking view).
Suitable settings
- Sand filtration for public and competition pools
- Large treatment plant rooms with tanks in parallel
Buying checklist
- Choose the 2.5 bar or 4 bar code by system pressure
- Check floor loading against full weight (tank, media and water)
- Lateral and nozzle internals take different media quantities; do not mix the lists
- The source declares no national standard or certification; obtain any required test reports separately
Peer comparison
The library's seven Emaux E filters step through 0.86, 1.13, 1.54, 2.01, 2.54, 3.14 and 3.80 m² of filter area, with flanges rising from 80 to 200 mm.
Source-scoped parameters
Vol.
2.10
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Filter Area
1.54
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Flange Connections GB
100
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Flange Connections ANSI
4”
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Sand Weight 0.5-0.8mm
1495
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Sand Weight 1-2mm
498
Original scope conditions
Laterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Vol.
2.10
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Filter Area
1.54
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Flange Connections GB
100
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Flange Connections ANSI
4”
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Sand Weight 0.5-0.8mm
1337
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Sand Weight 1-2mm
383
Original scope conditions
Nozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified.
Product Dimensions A/B/C/D/E/F/G
200 | 630 | 550 | 1180 | 1816 | 1400 | 1220
Original scope conditions
A/B/C/D/E/F/G reference the exact source drawing; not relabeled as generic length/width/height. Source-specific configuration, not independently measured. Market region and effective date unspecified.
| Parameter | Original value & unit | Conditions, scope & source |
|---|---|---|
| Vol. | 2.10 | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014809; Laterals System, 2.5bar; Source code 9014810; Laterals System, 4bar Open source ↗ |
| Filter Area | 1.54 | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014809; Laterals System, 2.5bar; Source code 9014810; Laterals System, 4bar Open source ↗ |
| Flange Connections GB | 100 | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014809; Laterals System, 2.5bar; Source code 9014810; Laterals System, 4bar Open source ↗ |
| Flange Connections ANSI | 4” | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014809; Laterals System, 2.5bar; Source code 9014810; Laterals System, 4bar Open source ↗ |
| Sand Weight 0.5-0.8mm | 1495 | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014809; Laterals System, 2.5bar; Source code 9014810; Laterals System, 4bar Open source ↗ |
| Sand Weight 1-2mm | 498 | Original scope conditionsLaterals System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014809; Laterals System, 2.5bar; Source code 9014810; Laterals System, 4bar Open source ↗ |
| Vol. | 2.10 | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014811; Nozzle System, 2.5bar; Source code 9014812; Nozzle System, 4bar Open source ↗ |
| Filter Area | 1.54 | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014811; Nozzle System, 2.5bar; Source code 9014812; Nozzle System, 4bar Open source ↗ |
| Flange Connections GB | 100 | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014811; Nozzle System, 2.5bar; Source code 9014812; Nozzle System, 4bar Open source ↗ |
| Flange Connections ANSI | 4” | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014811; Nozzle System, 2.5bar; Source code 9014812; Nozzle System, 4bar Open source ↗ |
| Sand Weight 0.5-0.8mm | 1337 | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014811; Nozzle System, 2.5bar; Source code 9014812; Nozzle System, 4bar Open source ↗ |
| Sand Weight 1-2mm | 383 | Original scope conditionsNozzle System; row applies to two explicitly listed pressure codes. Media grades are part of sand-weight meaning. Source-specific configuration, not independently measured. Market region and effective date unspecified. Source code 9014811; Nozzle System, 2.5bar; Source code 9014812; Nozzle System, 4bar Open source ↗ |
| Product Dimensions A/B/C/D/E/F/G | 200 | 630 | 550 | 1180 | 1816 | 1400 | 1220 | Original scope conditionsA/B/C/D/E/F/G reference the exact source drawing; not relabeled as generic length/width/height. Source-specific configuration, not independently measured. Market region and effective date unspecified. |
Sources & retrieval dates
Documented source dates
- Source acquisition record

