Industry Indices
← Research & analysis
Venue equipment

Venue equipment

Original research analysis

AO Buying Guide | Air-Dome Sports Venues: Lighting Reflection, Moisture-Resistant Flooring & Airlock Logistics

Details the special interior equipment rules for inflatable air-dome arenas (positive air pressure, zero roof hanging loads, high-reflectance white inner membranes, and airlock door limits) covering indirect lighting, flooring, and logistics.

Record date (source acquisition dates below) Nov 18, 2026 · Original editorial and source-scope review · Complete bilingual article and abstracts

Scope

Intended for operators equipping inflatable air-dome tennis, badminton, football, and ice arenas.

1. Three Counter-Intuitive Rules Inside Air-Dome Arenas

Because air domes carry zero roof hanging loads, lighting uses mast-mounted uplights bouncing diffused light off the white inner membrane; oversized equipment must clear the freight airlock (or enter before inflation); and perimeter condensation demands moisture-resistant flooring edges.

2 section citations

2. Air-Dome Interior Equipment Adaptation Matrix

Adaptation checklist across the four core interior packages in air domes:

2 section citations

Scroll the table to see all fields; original units are retained.

Interior SystemAir-Dome Specific RequirementCommon Mistake
Indirect LED UplightingPerimeter pole uplights bouncing off ≥80%-reflectance inner membrane; daylight dimming along skylightsUsing low-angle horizontal glare fixtures or unpadded lighting masts
Sports FlooringAcrylic (tennis), moisture-protected wood or 5–7.5 mm PVC, or non-infill turf (football)Skipping vapor barriers under slabs, causing blistering or wood cupping
Court ApparatusFloor-sleeved posts, lightweight divider curtains, ground-supported hoops onlyOrdering oversized hydraulic hoops after inflation that cannot pass the freight airlock
Air Quality & Backup PowerPM2.5 filtration + automatic backup generator against grid outagesSkipping generator load drills and filter replacement budgets

3. Sequencing Rule: Slab First, Heavy Gear Second, Inflation Third

Complete floor sleeves, lighting footings, and oversized equipment placement before final membrane inflation to avoid costly airlock disassembly.

2 section citations

Sources & retrieval dates

Documented source dates

  1. Source acquisition record