Industry Indices
← Product directory
TaishanTS MASTER 60AModel record · photo not recorded

Taishan

Catalogue identity (model or code)

Taishan Turf TS MASTER 60A football turf (McDonald's-shape filament)

Taishan Turf TS MASTER 60A (series example): 60 mm pile (63 mm total); PE McDonald's-shape yarn, Dtex 12000, 6 ends, 1.1 mm wide; 5/8″, 8,820 stitches/m²; total 2,642 g/m². Spec table lists 260 μm thickness while series header says 340–450 μm (dimensional) — flagged.

Source retrieved Oct 31, 2026 · Editorial source review · no independent performance test

Brand / publisher
Taishan · Taishan Artificial Turf Industry Co., Ltd.
Model
TS MASTER 60A
Category
Sports flooring
Region / configuration
Region in original source · TS MASTER 60A
View selection (0/4)

Up to 4 records; compare original sources without recommendations or performance ranks.

Models and configurations retain their source scope. Check specifications against the venue and intended use.

Scope

Identity type: published_example_spec_of_series; limited to dossier-captured page statements. No orderable SKU, independent certification, stock or install suitability inferred.

Manufacturer, trademark ownership, and currently orderable models should be confirmed with the manufacturer. The retrieval date is not a product effective date.

AO Ranking Review

Taishan Turf TS MASTER 60A football turf (McDonald's-shape filament), from Taishan, belongs to the sports artificial turf category. M-shaped yarn at Dtex 12,000, 1.1 mm wide and 260 μm thick per the specification table, with the same stitch count as CONQUEROR (8,820/m²) and 2,642 g/m² total. Compared with CONQUEROR the yarn is narrower and thinner with slightly lower Dtex and the same infill; the difference lies mainly in yarn shape and thickness.

AO Ranking view: For artificial turf the differences lie in yarn shape and Dtex, pile height, gauge and stitch density, total weight and the infill scheme. These set the baseline for wear and ball behaviour, but the final word is a field test under GB/T 20394 or the FIFA/FIH programmes (the source declares neither).

Evidence completeness: this entry does not yet record a full field test report; AO Ranking suggests requesting this from the maker before purchase rather than relying on thickness or marketing claims.

Suitable settings

  • Football pitches (school, community, professional)
  • Multi-use games areas
  • Five- and seven-a-side pitches

Buying checklist

  • Check yarn shape, Dtex, pile height and stitch count
  • Confirm the infill scheme (sand, rubber or non-infill) and quantities
  • Require field testing under GB/T 20394 or the FIFA/FIH programmes
  • For schools, check GB/T 43566-2023 and GB 36246-2018

Relevant standards

  • GB/T 20394-2019 Artificial turf for sports (AO Ranking suggests checking at procurement; not a publisher claim)Recommended national standard, current
  • GB/T 22517.5-2024 Sports grounds — requirements and test methods — Part 5: Football pitches (AO Ranking suggests checking at procurement; not a publisher claim)Recommended national standard effective 1 February 2025, for finished pitches
  • GB/T 43566-2023 Artificial-turf football pitches for primary and secondary schools (AO Ranking suggests checking at procurement; not a publisher claim)Recommended national standard effective 1 July 2024; a reference for school projects

Peer comparison

The library holds 9 other entries in this group (sports artificial turf), across 3 brands. Yarn Dtex (highest grade): 12000 here; across 7 disclosing entries (including this one) the range is 12000–18000, ranking 7 from the largest. These are mechanical comparisons of publisher figures and do not rank performance.

AO Ranking editorial view based on this page's source parameters, peer records in the database and public standards texts. Not independently tested by AO Ranking; not a ranking, certification or price judgement. · 2026-10-31

Source-scoped parameters

Pile height / total height

60mm / 63mm

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Yarn

PE McDonald's shape (M shape), Dtex 12000, 6 ply, width 1.1mm, spec-sheet thickness 260μm

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Gauge

5/8″

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Stitch rate / density

140 stitches/m; 8820 stitches/m²

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Geotextile weight

265g/m²

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Total weight

2642g/m²

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Infill (stabilising layer)

Quartz sand 0.315–1.0mm rounded, 25–30kg/m²

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Infill (performance layer)

Rubber granules 1.25–4.0mm angular, 16kg/m²

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Backing coating

SBR latex, dry adhesive 1000g/m²

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Roll width

2m / 3.85m / 4m / 5m (roll length customisable)

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Tuft withdrawal force

≥40N

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Permeability

60L/min/m²; drainage holes 10cm apart

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

Open source ↗

Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

ParameterOriginal value & unitConditions, scope & source
Pile height / total height60mm / 63mm
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages
YarnPE McDonald's shape (M shape), Dtex 12000, 6 ply, width 1.1mm, spec-sheet thickness 260μm
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages
Gauge5/8″Unit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages
Stitch rate / density140 stitches/m; 8820 stitches/m²Unit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages
Geotextile weight265g/m²Unit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages
Total weight2642g/m²Unit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages
Infill (stabilising layer)Quartz sand 0.315–1.0mm rounded, 25–30kg/m²
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages
Infill (performance layer)Rubber granules 1.25–4.0mm angular, 16kg/m²
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages
Backing coatingSBR latex, dry adhesive 1000g/m²Unit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages
Roll width2m / 3.85m / 4m / 5m (roll length customisable)Unit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages
Tuft withdrawal force≥40NUnit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages
Permeability60L/min/m²; drainage holes 10cm apart
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. Box-fetched 2026-10-31; re-verified from CN (Mac) egress 2026-10-31, HTTP 200.

TS MASTER 60A

Open source ↗Oct 31, 2026 · dossier key_parameters from captured CN manufacturer pages

Sources & retrieval dates

Documented source dates

  1. Source acquisition record