Industry Indices
← Research & analysis
Sports flooring

Research

Original research analysis

AO Ranking buying guide: artificial turf, synthetic tracks and court surfaces compared, with the standards each source states

Using 35 sports-surfaces products in the library that can be compared field by field (19 turf, 7 track and rubber surface, 9 court tile and rubber surface), this guide compares turf pile, gauge, stitch count and Dtex, non-infill performance figures, track thickness, build and stated standards, and tile thickness and force reduction; it lists the standards each source states and gives an AO Ranking checklist. Counts are from the AO Ranking library; no prices.

Record date (source acquisition dates below) Date unstated · Original editorial and source-scope review

Scope

Covers only products already in the library; counted from the AO Ranking library, not market share; no prices or sales; figures are publisher-stated and not tested by AO Ranking; no model's standards conformity is judged.

Sample and how to use this guide

As of 1 November 2026 the site lists 96 products in the sports-surfaces category. This guide uses only the 35 that can be compared field by field: 19 artificial turf products (MightyGrass 9, CCGrass 6, Taishan Turf 3, VIVATURF 1), 7 synthetic track and rubber surface products (Tongxin 3, Huadongtrack 4) and 9 court tile and rubber surface products (Enlio SES 7, Jinta 2). The 13 MightyGrass and Huadongtrack products were added in C8 and were not covered by the earlier sports-surfaces buying guide (31 October 2026). All figures are publisher-stated and not tested by AO Ranking; "AO Ranking calculation" only converts page figures. Pages disclose very different fields, so any dimension that most of the sample does not give is left out. Comparisons show parameter differences, not a quality ranking.

7 section citations

Artificial turf: pile height, gauge, stitch count and Dtex

Only pile height, yarn shape, gauge, stitch count and Dtex can be compared. Yarn thickness, total weight, tuft withdrawal force and infill are given line by line only for the 3 Taishan Turf products (CCGrass Superb and Mars give a 400 μm yarn thickness); none of the 9 MightyGrass pages gives them. AO Ranking calculation: a 5/8″ gauge is about 15.9 mm, or about 63 rows per metre. Taishan 140 stitches per metre × 63 is about 8820 per m²; MightyGrass FIFA MT-DIAMOND at 20 stitches per 10 cm (200 per metre) × 63 is about 12600; FIFA MT-UBEST 50 at 16.7 per 10 cm × 63 is about 10500. All three match the stated totals. AO Ranking view: (1) some MightyGrass pages give "10500stitches" with no unit, others add "/sqm", and the Dtex column reads "10000D", so confirm in writing whether the figure is dtex or denier and whether counts are per square metre; (2) the 3 models with "FIFA" in their names give no FIFA licence number; (3) at the same 5/8″ gauge, football turf in this sample spans 40 to 60 mm pile and 7560 to 12600 stitches per m², while the tennis turf MT-Peace (12 mm, 3/16″) and hockey turf FastPro HF (13 or 18 mm) serve other sports and should not be compared on density.

8 section citations

Scroll the table to see all fields; original units are retained.

BrandModelPileYarn shapeGaugeStitches (as written)Dtex (as written)Also on page
Taishan TurfTS CONQUEROR 60A60 mmDouble S5/8″8820 per m²12800400 μm thick, 2682 g/m² total, infill, withdrawal ≥40 N, drainage
Taishan TurfTS MASTER 60A60 mmM shape5/8″8820 per m²12000260 μm thick, 2642 g/m² total, infill, withdrawal ≥40 N
Taishan TurfTS GLOBAL TURF 6060 mmUFO shape5/8″7560 per m²17000400 μm thick, 3025 g/m² total, infill, withdrawal ≥40 N
MightyGrassFIFA MT-DIAMOND60 mmDiamond5/8″12600 (20 per 10 cm)10000D (6f)Backing
MightyGrassFIFA-MT-Diamond-5050 mmDiamond5/8″1050010000DBacking
MightyGrassFIFA MT-UBEST 5050 mmU5/8″10500 (16.7 per 10 cm)10000D (4f)Backing
MightyGrassMT-Diamond50 mmDiamond5/8″1050012000DBacking
MightyGrassMT-StemXL50 mmStemXL5/8″8820 to 12600 per sqm10000 to 16000 (6F)Triple-layer backing
CCGrassSuperb40 to 60 mmDiamond5/8″—17000 ±10%400 μm thick, FIFA Quality Pro performance ranges in a table
CCGrassMars50 / 60 mmMonofilament5/8″—18000400 μm thick
MightyGrassMT-Maxi3030 mmArc3/8″21000 to 25200 per sqm16000D to 17000DMulti-sport
MightyGrassMT-Peace (tennis)12 mmPeace3/16″441006000DBacking
CCGrassFastPro HF (hockey)13 / 18 mmCurled monofilament———FIH certification levels (publisher)

Non-infill turf: only CCGrass Leap gives performance figures

The library has 4 non-infill turf entries: CCGrass Leap, MightyGrass MT-Non-infill-Surf and MT-Non-infill-Arc (both 30 mm, 3/8″), and the VIVATURF non-infill football range (the page gives only range and sub-type names). Only Leap gives performance figures: force reduction >60%, vertical deformation 4 to 11 mm, ball rebound 0.6 to 1.0 m, ball roll 4 to 10 m, withdrawal force ≥40 N and UVA 5000 h. The two MightyGrass entries give construction only, and MT-Non-infill-Arc gives no stitch count or Dtex. AO Ranking view: without infill granules, cushioning has to come from the yarn and any shock pad, so compare performance figures such as force reduction and vertical deformation rather than pile height. For the other 3 entries, ask for a field test report before comparing.

4 section citations

Synthetic tracks: thickness, build and standards stated

Of the 7 entries, 5 are prefabricated rubber rolls (Tongxin Tangdao and Puluo; Huadongtrack GODER, GOMER and GOTER), 1 is a cast-in-place breathable system (Tongxin AcePU, 13 mm) and 1 is a multi-sport rubber surface (Huadongtrack JOYPLAY, 6 to 9 mm). Prefabricated thickness: Tongxin 9 to 14 mm (20 and 25 mm in reinforced zones); Huadongtrack 9 to 13 mm on 1.22 m rolls (GODER and GOMER state a 4 mm top layer and a 9 mm base). Only Huadongtrack gives performance figures, but its four "Technical Data" tables are identical line by line (force reduction 45%, vertical deformation 1.6 mm, wet friction ≥47 BPN and so on) and carry no report number, so AO Ranking reads them as typical brand values, not per-model test results. The 3 Tongxin entries give no performance figures, only the standards applied. Life and warranty are publisher statements: Tongxin Tangdao 8 to 12 years, GODER 15 years, GOTER up to 20 years, GOMER warranty up to 10 years. The "IAAF Class 1" on GOMER refers to the Incheon Asian Games venue certificate, not a product certification.

7 section citations

Scroll the table to see all fields; original units are retained.

BrandModelTypeThicknessStandards stated on pagePerformance figures
TongxinTangdaoPrefabricated rubber roll9 to 14 mm (20, 25 mm reinforced)GB 36246-2018, GB/T 14833-2020, GB/T 22517.6-2020, GB/T 43564-2023None
TongxinPuluoPrefabricated rubber roll9 to 14 mm (20, 25 mm reinforced)Same 4None
TongxinAcePUCast-in-place breathable13 mmSame 4None
HuadongtrackGODERPrefabricated rubber roll9 to 13 mmTest-standard column: World Athletics, EN 14836-2018, GB 36246-2018Yes (same table for 4)
HuadongtrackGOMERPrefabricated rubber roll9 to 13 mmSameYes (same table for 4)
HuadongtrackGOTERPrefabricated rubber roll9 to 13 mmSameYes (same table for 4)
HuadongtrackJOYPLAYMulti-sport rubber surface6 to 9 mmSameYes (same table for 4)

Court tiles and rubber surfaces: mostly only thickness is comparable

The 7 Enlio SES rubber court grades give thickness only: Classic 1.38 cm, General 1.4 cm, Popular second-gen Pro and third-gen 1.6 cm, Professional 2 cm, Professional 2.2 at 2.2 cm and Competition 2.5 cm, with no per-grade force reduction or ball rebound. The 2 Jinta products give more fields: the X6 suspended outdoor tile is 25 × 25 × 2.05 cm with force reduction >20%; the crystal-sand badminton mat is 4.5 mm with force reduction ≥35% and vertical deformation ≤3.5 mm, and states BWF certification and conformity with GB 18586. AO Ranking view: the 7 Enlio grades range from 1.38 cm to 2.5 cm thick, but thickness is not cushioning; ask for force reduction, vertical deformation and ball rebound tested by the same method for each Enlio grade before comparing. GB 18586 cited by Jinta concerns limits of harmful substances in PVC sheet coverings for interior decoration (by its title), not sports performance.

5 section citations

Scroll the table to see all fields; original units are retained.

BrandModel / gradeThickness / sizeForce reduction (page)Standards / certification stated
Enlio SESClassic1.38 cm——
Enlio SESGeneral1.4 cm——
Enlio SESPopular second-gen Pro / third-gen1.6 cm——
Enlio SESProfessional2 cm——
Enlio SESProfessional 2.22.2 cm——
Enlio SESCompetition2.5 cm——
JintaX6 suspended outdoor tile25 × 25 × 2.05 cm>20%—
JintaCrystal sand 4.5 badminton mat4.5 mm≥35%BWF; GB 18586
HuadongtrackJOYPLAY6 to 9 mm45% (shared brand table)World Athletics, EN 14836-2018, GB 36246-2018 (test-standard column)

Standards stated by each source, and an AO Ranking checklist

Among the 96 sports-surfaces records in the library, only 4 brands have a standard or certification in their parameter fields: Tongxin (4 national standards), Huadongtrack (test-standard column of its technical table), Jinta (BWF, GB 18586) and CCGrass (FIFA Quality / Quality Pro and FIH, mostly as reference venues or certification levels). MightyGrass, Taishan Turf, VIVATURF, Enlio, Gerflor, Tarkett, Bona and Oushi have no standards statement recorded in their parameter fields; this reflects only the fields the site has captured, not whether these brands test. Only Tongxin and Huadongtrack state GB 36246-2018 (mandatory national standard for synthetic surfaces at primary and secondary schools); no turf entry states GB/T 20394. The site does not judge any model's conformity. AO Ranking checklist: (1) compare turf stitch counts at the same gauge, confirm in writing whether counts are per metre or per square metre and which Dtex unit is used, and ask for yarn thickness, total weight, withdrawal force and infill; (2) judge non-infill turf on force reduction and vertical deformation, not pile height; (3) compare prefabricated and cast-in-place tracks separately, ask for numbered test reports for the exact model, and do not treat a shared brand table as a test result; (4) for school projects, require a GB 36246-2018 harmful-substance report and accept the field under GB/T 14833 and the GB/T 22517 series; (5) for "FIFA" and "IAAF" wording, check whether it is a product licence, a venue certificate or a reference project, and ask for the number; (6) do not compare tiles and rubber surfaces on thickness alone; force reduction, vertical deformation and ball rebound measured by one method are what compare.

4 section citations

Sources & retrieval dates

Documented source dates

  1. Source acquisition record
  2. Source acquisition record
  3. Source acquisition record