Beauty Water
Beauty Water LS side-mount gel-coat sand filter
Beauty Water LS side-mount gel-coat sand filter: The Beauty Water LS with maximum working pressure 250 kPa / 36 psi (2.5 bar) or 400 kPa / 58 psi (4.0 bar), maximum test pressure 400 kPa / 58 psi (4.0 bar) or 600 kPa / 86 psi (6.0 bar), maximum temperature 43 C (109 F), recommended media size 0.8-1.2 mm and more.
- Brand / publisher
- Beauty Water · Guangzhou Beauty Water Environmental Technology Co., Ltd. (Beauty Water)
- Model
- LS
- Category
- Pool equipment
- Region / configuration
- Region in original source · LS
Up to 4 records; compare original sources without recommendations or performance ranks.
Models and configurations retain their source scope. Check specifications against the venue and intended use.
Scope
Identity type: published_catalogue_model; limited to statements on the official product page. No orderable SKU, independent certification, stock or install suitability inferred.
AO Ranking Review
The publisher page lists the Beauty Water LS with maximum working pressure 250 kPa / 36 psi (2.5 bar) or 400 kPa / 58 psi (4.0 bar), maximum test pressure 400 kPa / 58 psi (4.0 bar) or 600 kPa / 86 psi (6.0 bar), maximum temperature 43 C (109 F), recommended media size 0.8-1.2 mm and more.
AO Ranking judgement: Side-mount gel-coat version with the same figures as the L series, aimed at villa and hotel pools. AO Ranking sees it as suited to small and mid-size pools; large commercial pools need diameter and filter area, which the page does not give. Below the Chinese figures the page carries a generic English note (50 C maximum water, 1-2 mm gravel, 0.5-0.8 mm silica sand) that disagrees with the Chinese 43 C and 0.8-1.2 mm; AO Ranking reads the English note as a site-wide template and uses only the Chinese figures.
Same type in the library: Ouya SCD-1200 top-mount sand filter, whose record lists Sand filter diameter 1200mm; Flow rate 51.6 m³/h. The two use different fields, so they can be read side by side but not ranked (AO Ranking judgement).
Suitable settings
- Circulation filtration for public and hotel pools
- Water parks and spa pools
Buying checklist
- Size diameter and filter area to circulation flow
- Match the working-pressure version to the system
- Confirm factory test pressure and warranty
Peer comparison
Same type in the library: Ouya SCD-1200 top-mount sand filter, whose record lists Sand filter diameter 1200mm; Flow rate 51.6 m³/h. The two use different fields, so they can be read side by side but not ranked (AO Ranking judgement). (Sub-group snapshot as of 2026-11-01; the current library holds 68 pool equipment records.)
Source-scoped parameters
Maximum working pressure
250kpa/36psi(2.5bar) 400kpa/58psi(4.0bar)
Original scope conditions
As listed on the official product page; no test conditions stated
Maximum test pressure
400kpa/58psi(4.0bar) 600kpa/86psi(6.0bar)
Original scope conditions
As listed on the official product page; no test conditions stated
Maximum temperature
43°C(109°F)
Original scope conditions
As listed on the official product page; no test conditions stated
Recommended media size
0.8mm~1.2mm
Original scope conditions
As listed on the official product page; no test conditions stated
Factory pressure test
stated as 100% pressure tested
Original scope conditions
As listed on the official product page; no test conditions stated
| Parameter | Original value & unit | Conditions, scope & source |
|---|---|---|
| Maximum working pressure | 250kpa/36psi(2.5bar) 400kpa/58psi(4.0bar) | Original scope conditionsAs listed on the official product page; no test conditions stated LS Open source ↗ |
| Maximum test pressure | 400kpa/58psi(4.0bar) 600kpa/86psi(6.0bar) | Original scope conditionsAs listed on the official product page; no test conditions stated LS Open source ↗ |
| Maximum temperature | 43°C(109°F) | Original scope conditionsAs listed on the official product page; no test conditions stated LS Open source ↗ |
| Recommended media size | 0.8mm~1.2mm | Original scope conditionsAs listed on the official product page; no test conditions stated LS Open source ↗ |
| Factory pressure test | stated as 100% pressure tested | Original scope conditionsAs listed on the official product page; no test conditions stated LS Open source ↗ |
Sources & retrieval dates
Documented source dates
- Source acquisition record

