Industry Indices
← Research & analysis
Editorial illustration

National standards

Original research analysis

Standards Explained | CJJ 122-2017 Swimming Pool Water Engineering Code: Turnover, Filtration Velocity & Plant Sizing

Breaks down China’s authoritative pool engineering code CJJ 122-2017 alongside GB 37488-2019—covering turnover times by pool type, sand-filter velocity ceilings, reverse-flow overflow design, and pump/filter sizing audits.

Record date (source acquisition dates below) Nov 18, 2026 · Original editorial and source-scope review · Complete bilingual article and abstracts

Scope

Intended for natatorium owners, MEP water engineers, and commercial pool-equipment buyers.

1. Why Pools Turn Cloudy or Irritating: Slow Turnover & Over-Driven Filters

Undersized sand filters paired with oversized pumps push filtration velocity above 45–50 m/h, blowing fine particulates straight back into the pool and forcing operators to overdose chlorine. CJJ 122-2017 enforces strict turnover and velocity ceilings to prevent this.

2 section citations

2. Turnover & Filter Sizing Matrix Under CJJ 122-2017

Use this table to audit whether a vendor’s filter-vessel count and area are properly sized:

2 section citations

Scroll the table to see all fields; original units are retained.

Pool TypeTypical Turnover TimeCirculation ModePlant-Room Audit Checks
Competition Pool (50 m)4 – 6 hoursReverse flow (floor inlets, perimeter overflow)Dedicated balance tank; size filter area at 20–30 m/h velocity across ≥2 parallel vessels
Public / University Pool3 – 4 hours (high bather load)Reverse or mixed circulation≥2 operating pumps + 1 standby; add VFDs for overnight setback
Children’s / Toddlers’ Pool1 – 2 hours (high contamination load)100% independent loop (NEVER share with adult pool)Dedicated high-turnover filtration + UV/low-chlorine loop
Thermal SPA / Hydrotherapy0.25 – 0.5 hours (15–30 min)Dedicated loop + rapid fresh-water dilutionHigh water temp depletes chlorine rapidly; mandate 24/7 automated ORP/pH dosing

3. A One-Minute Formula to Catch Undersized Sand Filters

Quick audit formula: Required filter area (m²) = Pool volume (m³) ÷ Turnover (h) ÷ Design velocity (~25 m/h). For a 1,250 m³ pool on a 4-hour turnover (312.5 m³/h), you need at least 12.5 m² of total filter area—instantly exposing undersized bids.

2 section citations

Sources & retrieval dates

Documented source dates

  1. Source acquisition record