Industry Indices
← Research & analysis
Court & competition equipment

Research

Original research analysis

AO Buying Guide | Throwing circles, inner rings and stop boards: identify the item before comparing dimensions

|Model|Manufacturer product identity|Manufacturer specification|Manufacturer mass|Manufacturer material| |---|---|---|---|---| |TQ1101|Shot-put throwing circle|Inner diameter 2135 mm; thickness 80 mm|Approx. 42 kg|Steel|…

Record date (source acquisition dates below) Nov 9, 2026 · Original editorial and source-scope review

Scope

AO Ranking buying guide based on captured manufacturer product-page statements; not a test, ranking or certification conclusion.

Four models are not four interchangeable circles

ModelManufacturer product identityManufacturer specificationManufacturer massManufacturer material
TQ1101Shot-put throwing circleInner diameter 2135 mm; thickness 80 mmApprox. 42 kgSteel
TQ1102Discus throwing circleInner diameter 2500 mm; thickness 80 mmApprox. 53 kgSteel
TQW0133Discus/hammer throwing-circle inner ringOuter diameter 2500 mm; inner diameter 2135 mm; thickness 20 mmApprox. 5 kgFRP
FLF740Stop boardWidth 112–300 mm; arc chord length 1210 mm15 kgPainted wood

AO judgement: separate the complete circle, inner ring and stop board in procurement. TQ1101 and TQ1102 are both steel circles, with different stated inner diameters and masses. TQW0133 is identified as an inner-ring accessory and lists two diameters; it should not be presented as a lighter substitute for a complete circle. FLF740 is a separate stop board, not a circle or a cage.

4 section citations

Useful comparisons

  • The same unit does not mean the same measurement. Separate circle inner diameter, inner-ring outer/inner diameter and stop-board chord length. The 1210 mm figure is a chord, not arc length. These catalogue figures do not prove installed compatibility.
  • Mass supports handling checks, not a strength grade. The approximate 42/53 kg figures for TQ1101/TQ1102 are manufacturer statements, not a safety comparison. TQW0133 has a different material and function; its approximate 5 kg should not enter a common lightweight ranking.
  • Preserve “thickness” as the source field. No section drawing was obtained, so do not relabel it wall thickness, ring height or embedment depth. Define the acceptance measurement after checking drawings.
  • State both the disclosure benefit and its limit. The four pages identify models, key dimensions, masses and materials. That supports a procurement-data comparison, but not an installation tolerance, fastening specification or compatible-model claim.
4 section citations

Put undisclosed details into contract attachments, not invented facts

Request installation and civil-interface drawings for each circle, compatibility documentation for the inner ring, stop-board fixing-hole/section drawings, and delivery/installation inspection methods. The captured pages do not provide a complete delivery list establishing that a cage or stop board comes with a circle; do not assume inclusion.

No explicit standard number or conformity certificate was found in these captured product details. No `declared` standard conclusion is assigned. Unverified standard or competition limits from the old draft are omitted. No standard full text suitable for clause-by-clause verification was obtained in this run. Project standards, editions and testing documents still need project-specific technical verification. The FLF740 page’s cross-discipline usage sentence is not expanded into an AO suitability claim.

4 section citations

Original sources and evidence

  1. TQ1101: https://www.taishansports.com.cn/product/1051.html
  2. TQ1102: https://www.taishansports.com.cn/product/1052.html
  3. TQW0133: https://www.taishansports.com.cn/product/1053.html
  4. FLF740: https://www.taishansports.com.cn/product/1054.html

See `parameter-evidence.csv` for field-level evidence and retrieval times. Raw HTML is internal reference, not for public redistribution. Check the “详情介绍” sections of `text/1051.txt`, `1052.txt`, `1053.txt` and `1054.txt`. Guide deduplication key: `guide|throwing-circle-inner-ring-stop-board`. Before integration, compare against the current library’s throwing-circle topic and update evidence for existing models instead of inserting duplicates.

4 section citations

Sources & retrieval dates

Documented source dates

  1. Source acquisition record