Industry Indices
← Product directory
DaplastHC85-32Model record · photo not recorded

Daplast

Source named model

HC85-32

Daplast HC85-32 venue seating/bleacher catalogue model or series context; source parameters include Row depth 85; Row height 32; seating places each row 4; Seat modules 2,25; up to 15. Original units/conditions retained; manufacturer ownership, site fit or orderability not inferred.

Source retrieved Oct 1, 2026 · Editorial source review · no independent performance test

Brand / publisher
Daplast
Model
HC85-32
Category
Venue equipment
Region / configuration
Region in original source · HC85-32
View selection (0/4)

Up to 4 records; compare original sources without recommendations or performance ranks.

Models and configurations retain their source scope. Check specifications against the venue and intended use.

Scope

Identity type: model. Exact source name only; source regions, components and drawing labels remain. Installation, compatibility, independent performance, orderability and manufacturer are unverified.

Manufacturer, trademark ownership, and currently orderable models should be confirmed with the manufacturer. The retrieval date is not a product effective date.

AO Ranking Review

Daplast HC85-32 demountable stand (Daplast product page): 85 cm row depth, 32 cm rise, 4 seats per row, 2.25 m seat modules, up to 15 rows.

AO Ranking view: The same 2.25 m module carries only 4 seats, about 562 mm per seat, the roomiest of the group, and 85 cm row depth adds comfort. Capacity is 20% lower than HC80-40 (AO Ranking calculation) in exchange.

Suitable settings

  • Temporary stands for VIP or premium areas
  • Long events

Buying checklist

  • Ask for structural calculations and wind and crowd load data; no standard is declared
  • Confirm ground bearing and levelling requirements
  • Check row rise against spectator sightline needs

Peer comparison

Daplast demountable stands in the library: HC72-25 has 72 cm row depth and 25 cm rise; HC80-40 80 / 40 cm; HC85-32 85 / 32 cm; TM-85-40 85 / 40 cm. Dividing module length by seats per row gives seat spacing of 450 mm for HC72-25 / HC80-40 (2.25 m / 5), 562 mm for HC85-32 (2.25 m / 4), 502 mm for TM-85-40 (2.51 m / 5) and 460 mm for T-Flex (2.30 m / 5) (AO Ranking calculation).

AO Ranking editorial view based on this page's source parameters, peer records in the database and public standards texts. Not independently tested by AO Ranking; not a ranking, certification or price judgement. · 2026-11-01

Source-scoped parameters

Row depth

85

cm

Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

Open source ↗

Oct 1, 2026 · L14

Row height

32

cm

Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

Open source ↗

Oct 1, 2026 · L15

seating places each row

4

places

Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

Open source ↗

Oct 1, 2026 · L16

Seat modules

2,25

meters

Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. HC85-32 PDF modular diagram must be reconciled before design use Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

Open source ↗

Oct 1, 2026 · L16

up to

15

rows

Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Other constructions require project design; elevated arrangement may have lower row limit Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

Open source ↗

Oct 1, 2026 · L20

MODULAR DESIGN, seating module

2

Unit not listed separately

Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Drawing unit is not printed beside the label. Current webpage says2.25meters; retain discrepancy without assuming unit or supersession. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

Open source ↗

Oct 1, 2026 · PDF p1, lower modular-design drawing (visually inspected)

ParameterOriginal value & unitConditions, scope & source
Row depth85cm
Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

HC85-32

Open source ↗Oct 1, 2026 · L14
Row height32cm
Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

HC85-32

Open source ↗Oct 1, 2026 · L15
seating places each row4places
Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

HC85-32 seating module

Open source ↗Oct 1, 2026 · L16
Seat modules2,25meters
Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. HC85-32 PDF modular diagram must be reconciled before design use Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

HC85-32 seating module

Open source ↗Oct 1, 2026 · L16
up to15rows
Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Other constructions require project design; elevated arrangement may have lower row limit Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

HC85-32 base arrangement

Open source ↗Oct 1, 2026 · L20
MODULAR DESIGN, seating module2Unit not listed separately
Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Drawing unit is not printed beside the label. Current webpage says2.25meters; retain discrepancy without assuming unit or supersession. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

HC85-32 PDF seating module

Open source ↗Oct 1, 2026 · PDF p1, lower modular-design drawing (visually inspected)

Sources & retrieval dates

Documented source dates

  1. Source acquisition record