Industry Indices
← Product directory
AvantLJ-CY430mm/450mmSource dimensions · schematic, not to scale

Avant

Catalogue identity (model or code)

Avant LJ-CY Lejia one-piece seat

Avant LJ-CY Lejia one-piece seat: 430 mm / 450 mm seat height, 514 mm depth, 445 mm width and 415 mm back height; an HDPE shell blow-moulded in one piece; laser-engraved stainless steel 304 seat and row numbers; row floor, row riser or individual riser mounting.

Source retrieved Nov 1, 2026 · Editorial source review · no independent performance test

Brand / publisher
Avant · Avant Sports Industrial Co., Ltd.
Model
LJ-CY
Category
Venue equipment
Region / configuration
Region in original source · LJ-CY
View selection (0/4)

Up to 4 records; compare original sources without recommendations or performance ranks.

Models and configurations retain their source scope. Check specifications against the venue and intended use.

Scope

Identity type: published_catalogue_model; limited to statements on the official product page. No orderable SKU, independent certification, stock or install suitability inferred.

Manufacturer, trademark ownership, and currently orderable models should be confirmed with the manufacturer. The retrieval date is not a product effective date.

AO Ranking Review

Avant LJ-CY (Lejia) is a mid-back one-piece fixed seat for indoor and outdoor use. The publisher page lists 430 mm / 450 mm seat height, 514 mm depth, 445 mm width and 415 mm back height; an HDPE shell blow-moulded in one piece; laser-engraved stainless steel 304 seat and row numbers; row floor, row riser or individual riser mounting.

AO Ranking view: The page contradicts itself: the browser title says LY-CY while the page says LJ-CY; the spec panel and shell text say one-piece blow-moulded HDPE, yet the later "advantages" section describes PP injection moulding, an automatic tip-up system and the Hardman tip-up seat, apparently copied from the Hardman range. Rely on a written specification. The page carries the site-wide reference list (QB/T 2601-2013, EN 13200-4:2006, EN 12727-2016, DIN 4102-1, BS 5852:2006 and others) but no test report number or load and durability figures for this model.

In the library, Avant YH-CF(J) and JZ-CF list seat centres of 480-500 mm and Juyi JY-750 a 455 mm spacing. AO Ranking calculation: a 10 m row holds about 20 seats at 480 mm centres and about 19 at 520 mm. This is a mechanical comparison of page figures, not an AO Ranking measurement.

Suitable settings

  • Arena and stadium stands
  • Cultural-sports centres and lecture halls

Buying checklist

  • Request test report numbers against QB/T 2601 or the listed European standards
  • Check how seat centres change seat count per row
  • Confirm fire rating and outdoor suitability

Peer comparison

In the library, Avant YH-CF(J) and JZ-CF list seat centres of 480-500 mm and Juyi JY-750 a 455 mm spacing. AO Ranking calculation: a 10 m row holds about 20 seats at 480 mm centres and about 19 at 520 mm. This is a mechanical comparison of page figures, not an AO Ranking measurement.

AO Ranking editorial view based on this page's source parameters, peer records in the database and public standards texts. Not independently tested by AO Ranking; not a ranking, certification or price judgement. · 2026-11-01

Source-scoped parameters

Seat height

430mm/450mm

mm

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

Open source ↗

Nov 1, 2026 · official product page, description block

Depth

514mm

mm

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

Open source ↗

Nov 1, 2026 · official product page, description block

Width

445mm

mm

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

Open source ↗

Nov 1, 2026 · official product page, description block

Back height

415mm

mm

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

Open source ↗

Nov 1, 2026 · official product page, description block

Seat shell

HDPE blow-moulded in one piece

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

Open source ↗

Nov 1, 2026 · official product page, description block

Material stated elsewhere on page

Seat and back injection-moulded in PP (conflicts with the HDPE statement)

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

Open source ↗

Nov 1, 2026 · official product page, description block

Installation

Row floor mounting, row riser mounting or individual riser mounting

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

Open source ↗

Nov 1, 2026 · official product page, description block

ParameterOriginal value & unitConditions, scope & source
Seat height430mm/450mmmm
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

LJ-CY

Open source ↗Nov 1, 2026 · official product page, description block
Depth514mmmm
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

LJ-CY

Open source ↗Nov 1, 2026 · official product page, description block
Width445mmmm
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

LJ-CY

Open source ↗Nov 1, 2026 · official product page, description block
Back height415mmmm
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

LJ-CY

Open source ↗Nov 1, 2026 · official product page, description block
Seat shellHDPE blow-moulded in one pieceUnit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

LJ-CY

Open source ↗Nov 1, 2026 · official product page, description block
Material stated elsewhere on pageSeat and back injection-moulded in PP (conflicts with the HDPE statement)
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

LJ-CY

Open source ↗Nov 1, 2026 · official product page, description block
InstallationRow floor mounting, row riser mounting or individual riser mountingUnit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock or install adequacy.

LJ-CY

Open source ↗Nov 1, 2026 · official product page, description block

Sources & retrieval dates

Documented source dates

  1. Source acquisition record