Industry Indices
← Product directory
DaplastHC80-40Model record · photo not recorded

Daplast

Source named model

HC80-40

Daplast HC80-40 venue seating/bleacher catalogue model or series context; source parameters include Row depth 80; Row height 40; seating places each row 5; Seat modules 2,25; up to 15. Original units/conditions retained; manufacturer ownership, site fit or orderability not inferred.

Source retrieved Oct 1, 2026 · Editorial source review · no independent performance test

Brand / publisher
Daplast
Model
HC80-40
Category
Venue equipment
Region / configuration
Region in original source · HC80-40
View selection (0/4)

Up to 4 records; compare original sources without recommendations or performance ranks.

Models and configurations retain their source scope. Check specifications against the venue and intended use.

Scope

Identity type: model. Exact source name only; source regions, components and drawing labels remain. Installation, compatibility, independent performance, orderability and manufacturer are unverified.

Manufacturer, trademark ownership, and currently orderable models should be confirmed with the manufacturer. The retrieval date is not a product effective date.

AO Ranking Review

Daplast HC80-40 demountable stand (Daplast product page): 80 cm row depth, 40 cm rise, 5 seats per row, 2.25 m seat modules, up to 15 rows.

AO Ranking view: A 40 cm rise is among the highest of the group, about 26.6 degrees (AO Ranking calculation), giving rear rows better sightlines but steeper steps. Up to 15 rows suits temporary event stands that need some capacity.

Suitable settings

  • Temporary event stands
  • Sites where rear-row sightlines matter

Buying checklist

  • Ask for structural calculations and wind and crowd load data; no standard is declared
  • Confirm ground bearing and levelling requirements
  • Check row rise against spectator sightline needs

Peer comparison

Daplast demountable stands in the library: HC72-25 has 72 cm row depth and 25 cm rise; HC80-40 80 / 40 cm; HC85-32 85 / 32 cm; TM-85-40 85 / 40 cm. Dividing module length by seats per row gives seat spacing of 450 mm for HC72-25 / HC80-40 (2.25 m / 5), 562 mm for HC85-32 (2.25 m / 4), 502 mm for TM-85-40 (2.51 m / 5) and 460 mm for T-Flex (2.30 m / 5) (AO Ranking calculation).

AO Ranking editorial view based on this page's source parameters, peer records in the database and public standards texts. Not independently tested by AO Ranking; not a ranking, certification or price judgement. · 2026-11-01

  • HC80-40 | Daplast ↗daplast.com · Retrieved Oct 1, 2026 Product main content, locally numbered lines L1–L37

Source-scoped parameters

Row depth

80

cm

Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

Open source ↗

Oct 1, 2026 · L13

Row height

40

cm

Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

Open source ↗

Oct 1, 2026 · L14

seating places each row

5

places

Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

Open source ↗

Oct 1, 2026 · L15

Seat modules

2,25

meters

Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

Open source ↗

Oct 1, 2026 · L15

up to

15

rows

Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Other constructions require project design; elevated arrangement may have lower row limit Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

Open source ↗

Oct 1, 2026 · L20

ParameterOriginal value & unitConditions, scope & source
Row depth80cm
Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

HC80-40

Open source ↗Oct 1, 2026 · L13
Row height40cm
Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

HC80-40

Open source ↗Oct 1, 2026 · L14
seating places each row5places
Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

HC80-40 seating module

Open source ↗Oct 1, 2026 · L15
Seat modules2,25meters
Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

HC80-40 seating module

Open source ↗Oct 1, 2026 · L15
up to15rows
Original scope conditions

Only the identified model/configuration and cited source. No sibling-page or family-to-model inheritance; no independent performance validation. Procurement scope and site fit must be confirmed. Other constructions require project design; elevated arrangement may have lower row limit Component scope: source named family only. This is a named family/system context, not a color/order configuration or independently measured specification.

HC80-40 base arrangement

Open source ↗Oct 1, 2026 · L20

Sources & retrieval dates

  • HC80-40 | Daplast ↗daplast.com · Retrieved Oct 1, 2026 Product main content, locally numbered lines L1–L37

Documented source dates

  1. Source acquisition record