Taishan
Taishan infrared photoelectric beam unit TQW-H014
Taishan infrared photoelectric beam unit TQW-H014: the official page states infrared beam break, working range at least 15 m, signal transmission at least 500 m, wired handset control for middle-distance races, DC12V supply with a DC14.4V 0.5A charger and a 1.2 m coiled DC lead. Not independently tested.
- Brand / publisher
- Taishan · Shandong Taishan Sports Equipment Co., Ltd.
- Model
- TQW-H014
- Category
- Court & competition equipment
- Region / configuration
- Region in original source · TQW-H014
Up to 4 records; compare original sources without recommendations or performance ranks.
Models and configurations retain their source scope. Check specifications against the venue and intended use.
Scope
Identity type: published_catalogue_model; limited to statements on the official product page. No orderable SKU, independent certification, stock or install suitability inferred.
AO Ranking Review
Taishan infrared photoelectric beam unit TQW-H014 is on the Taishan official timing and scoring page. It states infrared beam break with a working range of at least 15 m, signal transmission of at least 500 m, wired handset control 'for middle-distance races', DC12V supply with a DC14.4V 0.5A charger, and a 1.2 m coiled DC lead.
AO Ranking view: this is the trigger and beam piece on the finish line, not the result decision itself. The 15 m minimum range decides how many lanes it spans, so check it against the total lane width. The page gives only lower bounds and no response time or resolution, so it is no basis for timing accuracy; that sits with the judging unit and the high-speed camera, whose page gives a name only.
Before ordering: check range against lane width; ask battery life and charge time; ask the maker to show how it wires to the TQW-J010 judging unit and TQW-S008 hub.
Suitable settings
- Building a finish-line photo-timing system at an athletics ground
- Electronic timing for middle-distance and track events
Buying checklist
- Check range against total lane width
- Ask battery life and charge time
- Request a wiring diagram with the judging unit and hub
Peer comparison
Taishan splits its finish-line photo-timing stack over several pages: beam TQW-H014, head TQW-S012, camera interface TQW-X011, judging unit TQW-J010, hub TQW-S008 and reference marker TQW-J006; the high-speed camera and tripod pages give names only.
Source-scoped parameters
Performance / functions (publisher)
1、工作原理:红外线拦切,最大作用距离:≥15m,信号传输距离:≥500m;2、控制方式:有线手柄(中长跑中使用);3、工作电压:DC12V,充电器:DC14.4 V0.5A;4、配套电源线:螺旋弹簧DC线1.2m。
Original scope conditions
Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. AO Ranking has not independently tested.
| Parameter | Original value & unit | Conditions, scope & source |
|---|---|---|
| Performance / functions (publisher) | 1、工作原理:红外线拦切,最大作用距离:≥15m,信号传输距离:≥500m;2、控制方式:有线手柄(中长跑中使用);3、工作电压:DC12V,充电器:DC14.4 V0.5A;4、配套电源线:螺旋弹簧DC线1.2m。 | Original scope conditionsPublisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance. AO Ranking has not independently tested. TQW-H014 Open source ↗ |
Sources & retrieval dates
Documented source dates
- Source acquisition record

