Industry Indices
← Product directory
DafengYK-6525CSModel record · photo not recorded

Dafeng

Catalogue identity (model or code)

Dafeng YK-6525CS blow-moulded tip-up seat with armrests

Dafeng YK-6525CS blow-moulded tip-up seat with armrests: HDPE blow-moulding, armrests and a cup holder, a slightly raised seat front, pressed and welded hot-dip galvanised carbon-steel legs and riser or upright mounting; seat static load 2000 N and back 760 N, seat durability 950 N and back 330 N for 300,000 cycles each; a working range of 100 °C to -60 °C, colour difference △E≤4.5, an ageing claim against QB/T 2601-2013 and a service life of over 10 years.

Source retrieved Nov 1, 2026 · Editorial source review · no independent performance test

Model
YK-6525CS
Category
Venue equipment
Region / configuration
Region in original source · YK-6525CS
View selection (0/4)

Up to 4 records; compare original sources without recommendations or performance ranks.

Models and configurations retain their source scope. Check specifications against the venue and intended use.

Scope

Identity type: published_catalogue_model; limited to statements on the official product page. No orderable SKU, independent certification, stock or install suitability inferred.

Manufacturer, trademark ownership, and currently orderable models should be confirmed with the manufacturer. The retrieval date is not a product effective date.

AO Ranking Review

Dafeng YK-6525CS is a blow-moulded tip-up seat in the YK6000 series on the official site. The publisher page lists HDPE blow-moulding, armrests and a cup holder, a slightly raised seat front, pressed and welded hot-dip galvanised carbon-steel legs and riser or upright mounting; seat static load 2000 N and back 760 N, seat durability 950 N and back 330 N for 300,000 cycles each; a working range of 100 °C to -60 °C, colour difference △E≤4.5, an ageing claim against QB/T 2601-2013 and a service life of over 10 years.

AO Ranking calculation: 2000 N is about 204 kgf and 950 N about 97 kgf. AO Ranking view: tip-up seats ease evacuation and cleaning, and armrests and cup holders suit VIP or long-session areas; but the page does not describe the tip-up mechanism (spring or gravity) or its cycle rating, and gives no overall dimensions or centre spacing. The static-load and durability figures on the page name no testing body or report number, and "above national and industry standards" is the publisher's wording; so specify tip-up durability separately when buying.

Against YK-1563 / YK-1565 and the already recorded YK-3013 / YK-3015, the page load and life claims are the same, with tip-up action, armrests and a cup holder added; against the already recorded YS-2423 / YS-2425 (injection-moulded soft-return tip-up with stated dimensions), this is a blow-moulded seat with no dimensions given. The library also holds Dafeng YK-1263 (HDPE blow-moulded one-piece seat, 170 mm back, life over 8 years) and YK-1111 (backless blow-moulded seat), plus domestic stadium seats from Avant and Leadcom. This is a mechanical comparison of page figures, not an AO Ranking measurement.

Suitable settings

  • Stadium VIP and hospitality areas
  • Fixed arena seating

Buying checklist

  • Request third-party test reports and report numbers for static-load and durability tests
  • Confirm the mounting type (riser or floor) matches the terrace step dimensions
  • Write colour, fire and ageing requirements into the contract technical annex
  • Ask for the tip-up mechanism type and its cycle rating

Peer comparison

Against YK-1563 / YK-1565 and the already recorded YK-3013 / YK-3015, the page load and life claims are the same, with tip-up action, armrests and a cup holder added; against the already recorded YS-2423 / YS-2425 (injection-moulded soft-return tip-up with stated dimensions), this is a blow-moulded seat with no dimensions given. The library also holds Dafeng YK-1263 (HDPE blow-moulded one-piece seat, 170 mm back, life over 8 years) and YK-1111 (backless blow-moulded seat), plus domestic stadium seats from Avant and Leadcom. This is a mechanical comparison of page figures, not an AO Ranking measurement.

AO Ranking editorial view based on this page's source parameters, peer records in the database and public standards texts. Not independently tested by AO Ranking; not a ranking, certification or price judgement. · 2026-11-01

Source-scoped parameters

Material

High-density polyethylene (HDPE)

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

Construction

Blow-moulded tip-up seat with armrests and cup holder

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

Legs

Pressed and welded carbon-steel legs, hot-dip galvanised

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

Mounting

Riser-front (suspended) or upright mounting

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

Seat static load (publisher)

Seat static load 2000 N, 10 s, 10 times, no damage

N

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

Back static load (publisher)

Back static load 760 N, 10 s, 10 times, no damage

N

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

Seat durability (publisher)

Seat durability 950 N, 300,000 cycles, no damage

N

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

Back durability (publisher)

Back durability 330 N, 300,000 cycles, no damage

N

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

Working temperature (publisher)

100 °C to -60 °C

°C

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

Ageing standard claimed

QB/T2601-2013

Unit not listed separately

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

Colour difference (publisher)

△E≤4.5

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

Stated service life (publisher)

Service life over 10 years

year

Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

Open source ↗

Nov 1, 2026 · official product page, description block

ParameterOriginal value & unitConditions, scope & source
MaterialHigh-density polyethylene (HDPE)
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block
ConstructionBlow-moulded tip-up seat with armrests and cup holderUnit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block
LegsPressed and welded carbon-steel legs, hot-dip galvanisedUnit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block
MountingRiser-front (suspended) or upright mountingUnit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block
Seat static load (publisher)Seat static load 2000 N, 10 s, 10 times, no damageN
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block
Back static load (publisher)Back static load 760 N, 10 s, 10 times, no damageN
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block
Seat durability (publisher)Seat durability 950 N, 300,000 cycles, no damageN
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block
Back durability (publisher)Back durability 330 N, 300,000 cycles, no damageN
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block
Working temperature (publisher)100 °C to -60 °C°C
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block
Ageing standard claimedQB/T2601-2013Unit not listed separately
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block
Colour difference (publisher)△E≤4.5
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block
Stated service life (publisher)Service life over 10 yearsyear
Original scope conditions

Publisher-reported catalogue statement only; not independent certification, orderability, stock, install adequacy or live SKU acceptance.

YK-6525CS

Open source ↗Nov 1, 2026 · official product page, description block

Sources & retrieval dates

Documented source dates

  1. Source acquisition record