Type of floor covering
Omnisports Active+ 8.1mm: Type of floor covering = Heterogeneous indoor floorcoverings . Classification text printed by manufacturer; no independent certification.
- Source identifiers
- W14-FLOOR-ACTIVE-TDS
- Source location
- PDF page 1 / table column OMNISPORTS ACTIVE + / CLASSIFICATION / Type of floor covering
- Retrieved
- 2026-10-01T22:50:08.521862+00:00
- Revision date
- 2024-12
Read original source ↗Friction
Omnisports Active+ 8.1mm: Friction = 80 to 110 . Range is in the product-value column. No unit is printed and no percent or coefficient is inferred.
- Source identifiers
- W14-FLOOR-ACTIVE-TDS
- Source location
- PDF page 1 / table column OMNISPORTS ACTIVE + / REQUIREMENTS FOR SAFE USE / Friction
- Retrieved
- 2026-10-01T22:50:08.521862+00:00
- Revision date
- 2024-12
Read original source ↗Vertical deformation
Omnisports Active+ 8.1mm: Vertical deformation = P2 . Category P2 is not a measured deformation in mm; do not import the catalogue requirement ≤3 mm as a result.
- Source identifiers
- W14-FLOOR-ACTIVE-TDS
- Source location
- PDF page 1 / table column OMNISPORTS ACTIVE + / REQUIREMENTS FOR SAFE USE / Vertical deformation
- Retrieved
- 2026-10-01T22:50:08.521862+00:00
- Revision date
- 2024-12
Read original source ↗Specular gloss
Omnisports Active+ 8.1mm: Specular gloss = ≤30% %. No measurement angle or colour-specific result is stated in this row.
- Source identifiers
- W14-FLOOR-ACTIVE-TDS
- Source location
- PDF page 1 / table column OMNISPORTS ACTIVE + / REQUIREMENTS FOR SAFE USE / Specular gloss
- Retrieved
- 2026-10-01T22:50:08.521862+00:00
- Revision date
- 2024-12
Read original source ↗Vertical ball behaviour
Omnisports Active+ 8.1mm: Vertical ball behaviour = ≥95% %. This is the named-product TDS declaration; catalogue result is Compliant against a separate ≥90% requirement. Preserve both source bases.
- Source identifiers
- W14-FLOOR-ACTIVE-TDS
- Source location
- PDF page 1 / table column OMNISPORTS ACTIVE + / TECHNICAL PERFORMANCES / Vertical ball behaviour
- Retrieved
- 2026-10-01T22:50:08.521862+00:00
- Revision date
- 2024-12
Read original source ↗Reaction to fire
Omnisports Active+ 8.1mm: Reaction to fire = Cfl-s1* . Footnote limits this declaration to glued and GreenLay installation on concrete. No fire classification report or site approval was inspected.
- Source identifiers
- W14-FLOOR-ACTIVE-TDS
- Source location
- PDF page 1 / table column OMNISPORTS ACTIVE + / TECHNICAL PERFORMANCES / Reaction to fire
- Retrieved
- 2026-10-01T22:50:08.521862+00:00
- Revision date
- 2024-12
Read original source ↗Resistance to wear
Omnisports Active+ 8.1mm: Resistance to wear = ≤250mg mg. TDS bound differs from catalogue ≤1 g. Keep source scopes; do not select a replacement master value.
- Source identifiers
- W14-FLOOR-ACTIVE-TDS
- Source location
- PDF page 1 / table column OMNISPORTS ACTIVE + / TECHNICAL PERFORMANCES / Resistance to wear
- Retrieved
- 2026-10-01T22:50:08.521862+00:00
- Revision date
- 2024-12
Read original source ↗Resistance to indentation
Omnisports Active+ 8.1mm: Resistance to indentation = ≤0.3mm mm. Average measured value label is publisher wording; no underlying independent report reviewed.
- Source identifiers
- W14-FLOOR-ACTIVE-TDS
- Source location
- PDF page 1 / table column OMNISPORTS ACTIVE + / TECHNICAL PERFORMANCES / Resistance to indentation
- Retrieved
- 2026-10-01T22:50:08.521862+00:00
- Revision date
- 2024-12
Read original source ↗Resistance to a rolling load
Omnisports Active+ 8.1mm: Resistance to a rolling load = ≤0.5mm mm. This row reports a deformation bound, not a load-capacity rating; no load weight is inferred.
- Source identifiers
- W14-FLOOR-ACTIVE-TDS
- Source location
- PDF page 1 / table column OMNISPORTS ACTIVE + / TECHNICAL PERFORMANCES / Resistance to a rolling load
- Retrieved
- 2026-10-01T22:50:08.521862+00:00
- Revision date
- 2024-12
Read original source ↗Reduction of impact noise
Omnisports Active+ 8.1mm: Reduction of impact noise = 21dB dB. Not a complete room-acoustics or installed building performance claim.
- Source identifiers
- W14-FLOOR-ACTIVE-TDS
- Source location
- PDF page 1 / table column OMNISPORTS ACTIVE + / TECHNICAL PERFORMANCES / Reduction of impact noise
- Retrieved
- 2026-10-01T22:50:08.521862+00:00
- Revision date
- 2024-12
Read original source ↗Thermal resistance
Omnisports Active+ 8.1mm: Thermal resistance = Approx. 0.12 m² K/W m² K/W. Approximate source value; adjacent underfloor-heating compatibility is not a temperature limit or system-design approval.
- Source identifiers
- W14-FLOOR-ACTIVE-TDS
- Source location
- PDF page 1 / table column OMNISPORTS ACTIVE + / TECHNICAL PERFORMANCES / Thermal resistance
- Retrieved
- 2026-10-01T22:50:08.521862+00:00
- Revision date
- 2024-12
Read original source ↗Wear layer thickness
Omnisports Active+ 8.1mm: Wear layer thickness = 0,70 mm mm. Decimal comma preserved. Wear layer is distinct from total thickness; source does not establish the full layer stack thicknesses.
- Source identifiers
- W14-FLOOR-ACTIVE-PAGE
- Source location
- HTML / Technical specifications / Wear layer thickness; captured __NUXT_DATA__ entry 2444
- Retrieved
- 2026-10-01T22:48:58.117989+00:00
- Revision date
- Not supplied; retrieval is not an effective date
Read original source ↗Type of floor covering
Omnisports Pureplay 9.4mm: Type of floor covering = Heterogeneous indoor floorcoverings . Classification text printed by manufacturer; no independent certification.
- Source identifiers
- W14-FLOOR-PUREPLAY-TDS
- Source location
- PDF page 1 / table column OMNISPORTS PUREPLAY / CLASSIFICATION / Type of floor covering
- Retrieved
- 2026-10-01T22:50:12.745575+00:00
- Revision date
- 2024-12
Read original source ↗Friction
Omnisports Pureplay 9.4mm: Friction = 80 to 110 . Range is in the product-value column. No unit is printed and no percent or coefficient is inferred.
- Source identifiers
- W14-FLOOR-PUREPLAY-TDS
- Source location
- PDF page 1 / table column OMNISPORTS PUREPLAY / REQUIREMENTS FOR SAFE USE / Friction
- Retrieved
- 2026-10-01T22:50:12.745575+00:00
- Revision date
- 2024-12
Read original source ↗Vertical deformation
Omnisports Pureplay 9.4mm: Vertical deformation = P2 . Category P2 is not a measured deformation in mm; do not import the catalogue requirement ≤3 mm as a result.
- Source identifiers
- W14-FLOOR-PUREPLAY-TDS
- Source location
- PDF page 1 / table column OMNISPORTS PUREPLAY / REQUIREMENTS FOR SAFE USE / Vertical deformation
- Retrieved
- 2026-10-01T22:50:12.745575+00:00
- Revision date
- 2024-12
Read original source ↗Specular gloss
Omnisports Pureplay 9.4mm: Specular gloss = ≤30% %. No measurement angle or colour-specific result is stated in this row.
- Source identifiers
- W14-FLOOR-PUREPLAY-TDS
- Source location
- PDF page 1 / table column OMNISPORTS PUREPLAY / REQUIREMENTS FOR SAFE USE / Specular gloss
- Retrieved
- 2026-10-01T22:50:12.745575+00:00
- Revision date
- 2024-12
Read original source ↗Vertical ball behaviour
Omnisports Pureplay 9.4mm: Vertical ball behaviour = ≥90% %. This is the named-product TDS declaration; catalogue result is Compliant against a separate ≥90% requirement. Preserve both source bases.
- Source identifiers
- W14-FLOOR-PUREPLAY-TDS
- Source location
- PDF page 1 / table column OMNISPORTS PUREPLAY / TECHNICAL PERFORMANCES / Vertical ball behaviour
- Retrieved
- 2026-10-01T22:50:12.745575+00:00
- Revision date
- 2024-12
Read original source ↗Reaction to fire
Omnisports Pureplay 9.4mm: Reaction to fire = Cfl-s1* . Footnote limits this declaration to glued and GreenLay installation on concrete. No fire classification report or site approval was inspected.
- Source identifiers
- W14-FLOOR-PUREPLAY-TDS
- Source location
- PDF page 1 / table column OMNISPORTS PUREPLAY / TECHNICAL PERFORMANCES / Reaction to fire
- Retrieved
- 2026-10-01T22:50:12.745575+00:00
- Revision date
- 2024-12
Read original source ↗Resistance to wear
Omnisports Pureplay 9.4mm: Resistance to wear = ≤250mg mg. TDS bound differs from catalogue ≤1 g. Keep source scopes; do not select a replacement master value.
- Source identifiers
- W14-FLOOR-PUREPLAY-TDS
- Source location
- PDF page 1 / table column OMNISPORTS PUREPLAY / TECHNICAL PERFORMANCES / Resistance to wear
- Retrieved
- 2026-10-01T22:50:12.745575+00:00
- Revision date
- 2024-12
Read original source ↗Resistance to indentation
Omnisports Pureplay 9.4mm: Resistance to indentation = ≤0.5mm mm. Average measured value label is publisher wording; no underlying independent report reviewed.
- Source identifiers
- W14-FLOOR-PUREPLAY-TDS
- Source location
- PDF page 1 / table column OMNISPORTS PUREPLAY / TECHNICAL PERFORMANCES / Resistance to indentation
- Retrieved
- 2026-10-01T22:50:12.745575+00:00
- Revision date
- 2024-12
Read original source ↗Resistance to a rolling load
Omnisports Pureplay 9.4mm: Resistance to a rolling load = ≤0.5mm mm. This row reports a deformation bound, not a load-capacity rating; no load weight is inferred.
- Source identifiers
- W14-FLOOR-PUREPLAY-TDS
- Source location
- PDF page 1 / table column OMNISPORTS PUREPLAY / TECHNICAL PERFORMANCES / Resistance to a rolling load
- Retrieved
- 2026-10-01T22:50:12.745575+00:00
- Revision date
- 2024-12
Read original source ↗Reduction of impact noise
Omnisports Pureplay 9.4mm: Reduction of impact noise = 21dB dB. Not a complete room-acoustics or installed building performance claim.
- Source identifiers
- W14-FLOOR-PUREPLAY-TDS
- Source location
- PDF page 1 / table column OMNISPORTS PUREPLAY / TECHNICAL PERFORMANCES / Reduction of impact noise
- Retrieved
- 2026-10-01T22:50:12.745575+00:00
- Revision date
- 2024-12
Read original source ↗Thermal resistance
Omnisports Pureplay 9.4mm: Thermal resistance = Approx. 0.14 m² K/W m² K/W. Approximate source value; adjacent underfloor-heating compatibility is not a temperature limit or system-design approval.
- Source identifiers
- W14-FLOOR-PUREPLAY-TDS
- Source location
- PDF page 1 / table column OMNISPORTS PUREPLAY / TECHNICAL PERFORMANCES / Thermal resistance
- Retrieved
- 2026-10-01T22:50:12.745575+00:00
- Revision date
- 2024-12
Read original source ↗Wear layer thickness
Omnisports Pureplay 9.4mm: Wear layer thickness = 0,80 mm mm. Decimal comma preserved. Wear layer is distinct from total thickness; source does not establish the full layer stack thicknesses.
- Source identifiers
- W14-FLOOR-PUREPLAY-PAGE
- Source location
- HTML / Technical specifications / Wear layer thickness; captured __NUXT_DATA__ entry 2439
- Retrieved
- 2026-10-01T22:49:04.693584+00:00
- Revision date
- Not supplied; retrieval is not an effective date
Read original source ↗Foam thickness
Omnisports Pureplay 9.4mm: Product description = 6.5 mm mm. Foam thickness only; do not sum it with wear-layer thickness to infer unreported layers or an exact construction.
- Source identifiers
- W14-FLOOR-PUREPLAY-PAGE
- Source location
- HTML / product description / 6.5 mm-thick foam; captured __NUXT_DATA__ entry 2947
- Retrieved
- 2026-10-01T22:49:04.693584+00:00
- Revision date
- Not supplied; retrieval is not an effective date
Read original source ↗Surface treatment
Omnisports Active+ 8.1mm: Product description / surface treatment = Top Clean XP™ . Collection-page construction claim only; no chemistry, treatment thickness or exact SKU inferred.
- Source identifiers
- W14-FLOOR-ACTIVE-PAGE
- Source location
- HTML / product description; Construction item 1
- Retrieved
- 2026-10-01T22:48:58.117989+00:00
- Revision date
- Not supplied; retrieval is not an effective date
Read original source ↗Construction technology
Omnisports Active+ 8.1mm: Construction / item 4 = Omnisports X3LT - Extreme 3 layers Technology . Current page names X3LT; no source-dated bridge to 12/2024 PDF or precise three-layer materials/thicknesses was established.
- Source identifiers
- W14-FLOOR-ACTIVE-PAGE
- Source location
- HTML / Construction / item 4; captured __NUXT_DATA__ entry 2576
- Retrieved
- 2026-10-01T22:48:58.117989+00:00
- Revision date
- Not supplied; retrieval is not an effective date
Read original source ↗Surface treatment
Omnisports Pureplay 9.4mm: Product description / surface treatment = Top Clean XP™ . Collection-page construction claim only; no chemistry, treatment thickness or exact SKU inferred.
- Source identifiers
- W14-FLOOR-PUREPLAY-PAGE
- Source location
- HTML / product description; Construction item 1
- Retrieved
- 2026-10-01T22:49:04.693584+00:00
- Revision date
- Not supplied; retrieval is not an effective date
Read original source ↗Construction components
Omnisports Pureplay 9.4mm: Construction / items 4, 5 and 6 = Single glass veil reinforcement; homogeneous calendared sheet; high-density closed-cell foam with engineered honeycomb backing . Selected material/component phrases only. No complete bill of materials, layer thicknesses or exact SKU asserted; adjacent recycled-content and dimensional-stability marketing claims not imported.
- Source identifiers
- W14-FLOOR-PUREPLAY-PAGE
- Source location
- HTML / Construction / items 4, 5 and 6; captured __NUXT_DATA__ entry 2551
- Retrieved
- 2026-10-01T22:49:04.693584+00:00
- Revision date
- Not supplied; retrieval is not an effective date
Read original source ↗