Bonny / 波力
波力 黑曼巴乙巳系列 Black Mamba 蛇年限量紀念款
波力黑曼巴乙巳系列;来源拍框高刚性碳纤维+乌缺、镍钛丝高弹性中管,未穿线重量等级 3U/4U、平衡 300±5 mm 等;地区/系列上下文保留,宣传不作独立性能结果。
- 品牌 / 发布方
- Bonny / 波力
- 型号
- Black Mamba Yisi / Snake-Year commemorative edition
- 产业品类
- 球场与竞赛器材
- 地区 / 配置
- 面向台湾地区公开渠道资料(跨区版本等价性待确认) · 配置见原始资料
最多 4 条;核对原文与出处,不形成推荐或性能名次。
型号与配置按来源分别保留。规格适用于对应资料范围,请结合场地和使用条件核对。
适用范围
台灣繁體中文通路頁;不據此推定全球版本或銷售地域。 通路/集团关系不构成桐乡制造归属。未穿线状态和U级保持,不换算为未公布克数。
奥榜点评
波力 Black Mamba Yisi / Snake-Year commemorative edition属于羽毛球拍。据发布方页面,拍框材質 高剛性碳纖維+烏缺;中管材質 鎳鈦絲高彈性中管;重量等級 3U / 4U(未穿線);平衡 300±5mm(未穿線)。
奥榜判断:羽毛球拍的选择取决于重量级、平衡点、中管硬度与拍框形状;初学者通常适合较轻、较均衡的拍子,进阶进攻型更偏头重。以下判断基于发布方公布的材料与参数。
适用场景
- 业余与进阶球员
选购要点
- 按水平选择重量级与平衡点
- 确认中管硬度与建议拉力
- 核对柄号
对应标准
- GB/T 19851.9-2005 中小学体育器材和场地 第9部分:羽毛球拍
同类比较
库内同类(羽毛球拍)另有 3 条:波力 Ti-Armor 6000 II (yellow/black)、波力 WN175、波力 FT152。本站该条目暂未收录未穿线重量(标称),同类中有 2 条已收录。(注:上述同类子集统计于 2026 年 10 月统计期,目前「球场与竞赛器材」大类共收录 547 款文字参数产品。)
来源限定参数
拍框材質
高剛性碳纖維+烏缺
查看适用条件原文
Shared edition technical table; no separate class-level measurements 烏缺 is retained as publisher terminology; no separate chemical constituent, fiber grade or composition percentage inferred. Research translation: High-rigidity carbon fiber plus publisher term 烏缺 (Wuque); no source manufacturing or global variant allocation.
中管材質
鎳鈦絲高彈性中管
查看适用条件原文
Shared edition technical table; no separate class-level measurements Nickel-titanium wire is stated; alloy ratio, full shaft composition and measured modulus are unknown. Research translation: Nickel-titanium wire, high-elasticity shaft; no source manufacturing or global variant allocation.
重量等級
3U / 4U(未穿線)
查看适用条件原文
Shared edition technical table; no separate class-level measurements Alternatives, not a combined mass range; do not convert classes into gram values. Only 4U appears in the product response variant list. Research translation: 3U or 4U, unstrung; no source manufacturing or global variant allocation.
平衡
300±5mm(未穿線)
查看适用条件原文
Shared edition technical table; no separate class-level measurements Research translation: 300 ± 5 mm, unstrung; no source manufacturing or global variant allocation.
長度
675±1mm(中管215mm)
查看适用条件原文
Shared edition technical table; no separate class-level measurements Research translation: 675 ± 1 mm overall; shaft 215 mm; no source manufacturing or global variant allocation.
中管長度
中管215mm
查看适用条件原文
Shared edition technical table; no separate class-level measurements Research translation: 215 mm; no source manufacturing or global variant allocation.
中管尺寸(方向未標示)
鎳鈦絲6.8mm中管
查看适用条件原文
Shared edition technical table; no separate class-level measurements The descriptive shaft paragraph gives a 6.8 mm shaft-size statement without naming the measurement axis; no axis, tolerance or measured-sample validation is inferred. Research translation: 6.8 mm nickel-titanium-wire shaft-size statement; axis unspecified; no source manufacturing or global variant allocation.
柄號
1#/G5
查看适用条件原文
Shared edition technical table; no separate class-level measurements Research translation: 1# / G5; no source manufacturing or global variant allocation.
拍框
寬邊超薄小平頭
查看适用条件原文
Shared edition technical table; no separate class-level measurements Research translation: Wide-profile, ultra-thin, small flat/isometric head; no source manufacturing or global variant allocation.
| 参数 | 原始值与单位 | 条件、范围与来源 |
|---|---|---|
| 拍框材質 | 高剛性碳纖維+烏缺 | 查看适用条件原文Shared edition technical table; no separate class-level measurements 烏缺 is retained as publisher terminology; no separate chemical constituent, fiber grade or composition percentage inferred. Research translation: High-rigidity carbon fiber plus publisher term 烏缺 (Wuque); no source manufacturing or global variant allocation. 面向台湾地区公开渠道资料(跨区版本等价性待确认) 查看原始来源 ↗ |
| 中管材質 | 鎳鈦絲高彈性中管 | 查看适用条件原文Shared edition technical table; no separate class-level measurements Nickel-titanium wire is stated; alloy ratio, full shaft composition and measured modulus are unknown. Research translation: Nickel-titanium wire, high-elasticity shaft; no source manufacturing or global variant allocation. 面向台湾地区公开渠道资料(跨区版本等价性待确认) 查看原始来源 ↗ |
| 重量等級 | 3U / 4U(未穿線) | 查看适用条件原文Shared edition technical table; no separate class-level measurements Alternatives, not a combined mass range; do not convert classes into gram values. Only 4U appears in the product response variant list. Research translation: 3U or 4U, unstrung; no source manufacturing or global variant allocation. 面向台湾地区公开渠道资料(跨区版本等价性待确认) 查看原始来源 ↗ |
| 平衡 | 300±5mm(未穿線) | 查看适用条件原文Shared edition technical table; no separate class-level measurements Research translation: 300 ± 5 mm, unstrung; no source manufacturing or global variant allocation. 面向台湾地区公开渠道资料(跨区版本等价性待确认) 查看原始来源 ↗ |
| 長度 | 675±1mm(中管215mm) | 查看适用条件原文Shared edition technical table; no separate class-level measurements Research translation: 675 ± 1 mm overall; shaft 215 mm; no source manufacturing or global variant allocation. 面向台湾地区公开渠道资料(跨区版本等价性待确认) 查看原始来源 ↗ |
| 中管長度 | 中管215mm | 查看适用条件原文Shared edition technical table; no separate class-level measurements Research translation: 215 mm; no source manufacturing or global variant allocation. 面向台湾地区公开渠道资料(跨区版本等价性待确认) 查看原始来源 ↗ |
| 中管尺寸(方向未標示) | 鎳鈦絲6.8mm中管 | 查看适用条件原文Shared edition technical table; no separate class-level measurements The descriptive shaft paragraph gives a 6.8 mm shaft-size statement without naming the measurement axis; no axis, tolerance or measured-sample validation is inferred. Research translation: 6.8 mm nickel-titanium-wire shaft-size statement; axis unspecified; no source manufacturing or global variant allocation. 面向台湾地区公开渠道资料(跨区版本等价性待确认) 查看原始来源 ↗ |
| 柄號 | 1#/G5 | 查看适用条件原文Shared edition technical table; no separate class-level measurements Research translation: 1# / G5; no source manufacturing or global variant allocation. 面向台湾地区公开渠道资料(跨区版本等价性待确认) 查看原始来源 ↗ |
| 拍框 | 寬邊超薄小平頭 | 查看适用条件原文Shared edition technical table; no separate class-level measurements Research translation: Wide-profile, ultra-thin, small flat/isometric head; no source manufacturing or global variant allocation. 面向台湾地区公开渠道资料(跨区版本等价性待确认) 查看原始来源 ↗ |
来源与取得时间
有据可查的资料日期
- 资料取得记录

