AstralPool
AstralPool 56634
AstralPool Kivu 离心泵目录型号 56634;来源字段含 吸入连接标注 150-6” source combined nominal number / inch;输出连接标注 125-5” source combined nominal number / inch;独立前置过滤器容量 25 l / liters;电机安装法兰 B5 aluminium motor flange;保留原始单位与适用条件,不合并为完整水处理系统设计。
- 品牌 / 发布方
- AstralPool · AstralPool(Fluidra 旗下品牌)
- 型号
- 56634
- 产业品类
- 泳池设备
- 地区 / 配置
- 国际版公开产品资料(具体地区与硬件改款以厂家确认为准) · 配置见原始资料
最多 4 条;核对原文与出处,不形成推荐或性能名次。
型号与配置按来源分别保留。规格适用于对应资料范围,请结合场地和使用条件核对。
适用范围
High performance plastic centrifugal pump for public pools that works at 1500 rpm.
奥榜点评
AstralPool Kivu 离心泵 56634(AstralPool 官网产品页):吸入连接 150-6”,输出连接 125-5”,独立前置过滤器 25 L,B5 铝制电机法兰。
奥榜判断:库内记录与 56635 逐项相同,两者在功率、流量上的区别官网参数官网公开资料未单列,选型时必须调出性能曲线,不能互换使用。
适用场景
- 公共泳池、竞赛池的主循环
- 大水量水上乐园循环系统
选购要点
- 索取对应型号的流量—扬程曲线与电机功率
- 核对 6”/5” 管路与现场管径的匹配
- 来源未声明执行的国家标准或认证,项目需要的检测报告须另行索取
同类比较
库内 Kivu 三条:56634 与 56635 记录的吸入 150-6”、输出 125-5”、25 L 前置过滤器和 B5 铝电机法兰完全相同,56633 只有 1500 rpm 一项。与 Emaux APS1000P / APS1500P 的 6”/DN150 接口和 30 L 过滤篮相比,Kivu 的吸入口同为 6” 级,前置过滤器小 5 L。
来源限定参数
吸入连接标注
150-6”
查看适用条件原文
Exact code/configuration only. Publisher-reported; market version, applicability date and independent test conditions unknown unless expressly stated. No family maximum inherited. Literal mixed nominal/inch notation; no dimensional conversion performed. 仅限KIVU 56634 WITH PRE-FILTER基础代码及所引表行/明确覆盖描述;排除56634-0890。印刷56633-FT 18.02.16与文件名2021_11分开保留,不能据此确定生效日。DNa原始连接标注,保留名义数字/英寸混合表达,不转换为测量直径。仅保留发布方原始来源陈述;未独立测量,不建立认证、制造主体、评分、现货、采购适用性或跨地区/修订等价。读取时间不是发布或生效日期;原条件及specific_caveat完整保留。 仍保留:C1=677/688、G=480/290 mm的整机图纸差异仍保留;DNa/DNi连接标注、前滤器容量与安装法兰是独立来源字段,不选择任一尺寸版本。 Only KIVU base code 56634 WITH PRE-FILTER and its cited row or explicitly covering description; exclude 56634-0890. Preserve printed 56633-FT 18.02.16 separately from filename 2021_11; neither establishes an effective date. Literal DNa connection designation, preserving mixed nominal-number/inch notation without conversion to measured diameter. Publisher-reported source statement only, not independently measured. No certification, manufacturer allocation, score, stock, procurement suitability or cross-market/revision equivalence. Retrieval is not publication or effective date; original conditions and specific_caveat are retained in full. Remaining holds: C1=677/688 and G=480/290 mm remain held. DNa/DNi connection designations, prefilter capacity and motor flange are separate source statements and choose neither drawing version. Source version (verbatim): Printed 56633-FT 18.02.16; filename 2021_11 differs; effective date unknown
输出连接标注
125-5”
查看适用条件原文
Exact code/configuration only. Publisher-reported; market version, applicability date and independent test conditions unknown unless expressly stated. No family maximum inherited. Literal mixed nominal/inch notation; no dimensional conversion performed. 仅限KIVU 56634 WITH PRE-FILTER基础代码及所引表行/明确覆盖描述;排除56634-0890。印刷56633-FT 18.02.16与文件名2021_11分开保留,不能据此确定生效日。DNi原始连接标注,保留名义数字/英寸混合表达,不转换为测量直径。仅保留发布方原始来源陈述;未独立测量,不建立认证、制造主体、评分、现货、采购适用性或跨地区/修订等价。读取时间不是发布或生效日期;原条件及specific_caveat完整保留。 仍保留:C1=677/688、G=480/290 mm的整机图纸差异仍保留;DNa/DNi连接标注、前滤器容量与安装法兰是独立来源字段,不选择任一尺寸版本。 Only KIVU base code 56634 WITH PRE-FILTER and its cited row or explicitly covering description; exclude 56634-0890. Preserve printed 56633-FT 18.02.16 separately from filename 2021_11; neither establishes an effective date. Literal DNi connection designation, preserving mixed nominal-number/inch notation without conversion to measured diameter. Publisher-reported source statement only, not independently measured. No certification, manufacturer allocation, score, stock, procurement suitability or cross-market/revision equivalence. Retrieval is not publication or effective date; original conditions and specific_caveat are retained in full. Remaining holds: C1=677/688 and G=480/290 mm remain held. DNa/DNi connection designations, prefilter capacity and motor flange are separate source statements and choose neither drawing version. Source version (verbatim): Printed 56633-FT 18.02.16; filename 2021_11 differs; effective date unknown
独立前置过滤器容量
25
查看适用条件原文
Exact code/configuration only. Publisher-reported; market version, applicability date and independent test conditions unknown unless expressly stated. No family maximum inherited. Base codes explicitly form kit with prefilter56733; pump-only suffix-0890 is excluded. 仅限KIVU 56634 WITH PRE-FILTER基础代码及所引表行/明确覆盖描述;排除56634-0890。印刷56633-FT 18.02.16与文件名2021_11分开保留,不能据此确定生效日。WITH PRE-FILTER基础代码明确含56733前滤器,其25 l来源容量不推及-0890泵本体。仅保留发布方原始来源陈述;未独立测量,不建立认证、制造主体、评分、现货、采购适用性或跨地区/修订等价。读取时间不是发布或生效日期;原条件及specific_caveat完整保留。 仍保留:C1=677/688、G=480/290 mm的整机图纸差异仍保留;DNa/DNi连接标注、前滤器容量与安装法兰是独立来源字段,不选择任一尺寸版本。 Only KIVU base code 56634 WITH PRE-FILTER and its cited row or explicitly covering description; exclude 56634-0890. Preserve printed 56633-FT 18.02.16 separately from filename 2021_11; neither establishes an effective date. The WITH PRE-FILTER base-code kit explicitly includes prefilter 56733; its stated 25 l capacity is not inherited by pump-only -0890. Publisher-reported source statement only, not independently measured. No certification, manufacturer allocation, score, stock, procurement suitability or cross-market/revision equivalence. Retrieval is not publication or effective date; original conditions and specific_caveat are retained in full. Remaining holds: C1=677/688 and G=480/290 mm remain held. DNa/DNi connection designations, prefilter capacity and motor flange are separate source statements and choose neither drawing version. Source version (verbatim): Printed 56633-FT 18.02.16; filename 2021_11 differs; effective date unknown
电机安装法兰
B5 aluminium motor flange
查看适用条件原文
Exact code/configuration only. Publisher-reported; market version, applicability date and independent test conditions unknown unless expressly stated. No family maximum inherited. Common specification for listed7.5/10/15 modes, not a maximum. 仅限KIVU 56634 WITH PRE-FILTER基础代码及所引表行/明确覆盖描述;排除56634-0890。印刷56633-FT 18.02.16与文件名2021_11分开保留,不能据此确定生效日。明确涵盖所列7.5/10/15配置的共同B5铝法兰描述,不是家族最大值或电机认证。仅保留发布方原始来源陈述;未独立测量,不建立认证、制造主体、评分、现货、采购适用性或跨地区/修订等价。读取时间不是发布或生效日期;原条件及specific_caveat完整保留。 仍保留:C1=677/688、G=480/290 mm的整机图纸差异仍保留;DNa/DNi连接标注、前滤器容量与安装法兰是独立来源字段,不选择任一尺寸版本。 Only KIVU base code 56634 WITH PRE-FILTER and its cited row or explicitly covering description; exclude 56634-0890. Preserve printed 56633-FT 18.02.16 separately from filename 2021_11; neither establishes an effective date. Common B5 aluminium flange description explicitly covering the listed 7.5/10/15 configurations, not a family maximum or motor certification. Publisher-reported source statement only, not independently measured. No certification, manufacturer allocation, score, stock, procurement suitability or cross-market/revision equivalence. Retrieval is not publication or effective date; original conditions and specific_caveat are retained in full. Remaining holds: C1=677/688 and G=480/290 mm remain held. DNa/DNi connection designations, prefilter capacity and motor flange are separate source statements and choose neither drawing version. Source version (verbatim): Printed 56633-FT 18.02.16; filename 2021_11 differs; effective date unknown
| 参数 | 原始值与单位 | 条件、范围与来源 |
|---|---|---|
| 吸入连接标注 | 150-6” | 查看适用条件原文Exact code/configuration only. Publisher-reported; market version, applicability date and independent test conditions unknown unless expressly stated. No family maximum inherited. Literal mixed nominal/inch notation; no dimensional conversion performed. 仅限KIVU 56634 WITH PRE-FILTER基础代码及所引表行/明确覆盖描述;排除56634-0890。印刷56633-FT 18.02.16与文件名2021_11分开保留,不能据此确定生效日。DNa原始连接标注,保留名义数字/英寸混合表达,不转换为测量直径。仅保留发布方原始来源陈述;未独立测量,不建立认证、制造主体、评分、现货、采购适用性或跨地区/修订等价。读取时间不是发布或生效日期;原条件及specific_caveat完整保留。 仍保留:C1=677/688、G=480/290 mm的整机图纸差异仍保留;DNa/DNi连接标注、前滤器容量与安装法兰是独立来源字段,不选择任一尺寸版本。 Only KIVU base code 56634 WITH PRE-FILTER and its cited row or explicitly covering description; exclude 56634-0890. Preserve printed 56633-FT 18.02.16 separately from filename 2021_11; neither establishes an effective date. Literal DNa connection designation, preserving mixed nominal-number/inch notation without conversion to measured diameter. Publisher-reported source statement only, not independently measured. No certification, manufacturer allocation, score, stock, procurement suitability or cross-market/revision equivalence. Retrieval is not publication or effective date; original conditions and specific_caveat are retained in full. Remaining holds: C1=677/688 and G=480/290 mm remain held. DNa/DNi connection designations, prefilter capacity and motor flange are separate source statements and choose neither drawing version. Source version (verbatim): Printed 56633-FT 18.02.16; filename 2021_11 differs; effective date unknown 国际版公开产品资料(具体地区与硬件改款以厂家确认为准) 查看原始来源 ↗ |
| 输出连接标注 | 125-5” | 查看适用条件原文Exact code/configuration only. Publisher-reported; market version, applicability date and independent test conditions unknown unless expressly stated. No family maximum inherited. Literal mixed nominal/inch notation; no dimensional conversion performed. 仅限KIVU 56634 WITH PRE-FILTER基础代码及所引表行/明确覆盖描述;排除56634-0890。印刷56633-FT 18.02.16与文件名2021_11分开保留,不能据此确定生效日。DNi原始连接标注,保留名义数字/英寸混合表达,不转换为测量直径。仅保留发布方原始来源陈述;未独立测量,不建立认证、制造主体、评分、现货、采购适用性或跨地区/修订等价。读取时间不是发布或生效日期;原条件及specific_caveat完整保留。 仍保留:C1=677/688、G=480/290 mm的整机图纸差异仍保留;DNa/DNi连接标注、前滤器容量与安装法兰是独立来源字段,不选择任一尺寸版本。 Only KIVU base code 56634 WITH PRE-FILTER and its cited row or explicitly covering description; exclude 56634-0890. Preserve printed 56633-FT 18.02.16 separately from filename 2021_11; neither establishes an effective date. Literal DNi connection designation, preserving mixed nominal-number/inch notation without conversion to measured diameter. Publisher-reported source statement only, not independently measured. No certification, manufacturer allocation, score, stock, procurement suitability or cross-market/revision equivalence. Retrieval is not publication or effective date; original conditions and specific_caveat are retained in full. Remaining holds: C1=677/688 and G=480/290 mm remain held. DNa/DNi connection designations, prefilter capacity and motor flange are separate source statements and choose neither drawing version. Source version (verbatim): Printed 56633-FT 18.02.16; filename 2021_11 differs; effective date unknown 国际版公开产品资料(具体地区与硬件改款以厂家确认为准) 查看原始来源 ↗ |
| 独立前置过滤器容量 | 25 | 查看适用条件原文Exact code/configuration only. Publisher-reported; market version, applicability date and independent test conditions unknown unless expressly stated. No family maximum inherited. Base codes explicitly form kit with prefilter56733; pump-only suffix-0890 is excluded. 仅限KIVU 56634 WITH PRE-FILTER基础代码及所引表行/明确覆盖描述;排除56634-0890。印刷56633-FT 18.02.16与文件名2021_11分开保留,不能据此确定生效日。WITH PRE-FILTER基础代码明确含56733前滤器,其25 l来源容量不推及-0890泵本体。仅保留发布方原始来源陈述;未独立测量,不建立认证、制造主体、评分、现货、采购适用性或跨地区/修订等价。读取时间不是发布或生效日期;原条件及specific_caveat完整保留。 仍保留:C1=677/688、G=480/290 mm的整机图纸差异仍保留;DNa/DNi连接标注、前滤器容量与安装法兰是独立来源字段,不选择任一尺寸版本。 Only KIVU base code 56634 WITH PRE-FILTER and its cited row or explicitly covering description; exclude 56634-0890. Preserve printed 56633-FT 18.02.16 separately from filename 2021_11; neither establishes an effective date. The WITH PRE-FILTER base-code kit explicitly includes prefilter 56733; its stated 25 l capacity is not inherited by pump-only -0890. Publisher-reported source statement only, not independently measured. No certification, manufacturer allocation, score, stock, procurement suitability or cross-market/revision equivalence. Retrieval is not publication or effective date; original conditions and specific_caveat are retained in full. Remaining holds: C1=677/688 and G=480/290 mm remain held. DNa/DNi connection designations, prefilter capacity and motor flange are separate source statements and choose neither drawing version. Source version (verbatim): Printed 56633-FT 18.02.16; filename 2021_11 differs; effective date unknown 国际版公开产品资料(具体地区与硬件改款以厂家确认为准) 查看原始来源 ↗ |
| 电机安装法兰 | B5 aluminium motor flange | 查看适用条件原文Exact code/configuration only. Publisher-reported; market version, applicability date and independent test conditions unknown unless expressly stated. No family maximum inherited. Common specification for listed7.5/10/15 modes, not a maximum. 仅限KIVU 56634 WITH PRE-FILTER基础代码及所引表行/明确覆盖描述;排除56634-0890。印刷56633-FT 18.02.16与文件名2021_11分开保留,不能据此确定生效日。明确涵盖所列7.5/10/15配置的共同B5铝法兰描述,不是家族最大值或电机认证。仅保留发布方原始来源陈述;未独立测量,不建立认证、制造主体、评分、现货、采购适用性或跨地区/修订等价。读取时间不是发布或生效日期;原条件及specific_caveat完整保留。 仍保留:C1=677/688、G=480/290 mm的整机图纸差异仍保留;DNa/DNi连接标注、前滤器容量与安装法兰是独立来源字段,不选择任一尺寸版本。 Only KIVU base code 56634 WITH PRE-FILTER and its cited row or explicitly covering description; exclude 56634-0890. Preserve printed 56633-FT 18.02.16 separately from filename 2021_11; neither establishes an effective date. Common B5 aluminium flange description explicitly covering the listed 7.5/10/15 configurations, not a family maximum or motor certification. Publisher-reported source statement only, not independently measured. No certification, manufacturer allocation, score, stock, procurement suitability or cross-market/revision equivalence. Retrieval is not publication or effective date; original conditions and specific_caveat are retained in full. Remaining holds: C1=677/688 and G=480/290 mm remain held. DNa/DNi connection designations, prefilter capacity and motor flange are separate source statements and choose neither drawing version. Source version (verbatim): Printed 56633-FT 18.02.16; filename 2021_11 differs; effective date unknown 国际版公开产品资料(具体地区与硬件改款以厂家确认为准) 查看原始来源 ↗ |
来源与取得时间
有据可查的资料日期
- 资料取得记录
- 资料取得记录

